Irrigation / equipment · 1 PAGE
Dosatron components
The components used in the CropSalt dosing assembly.
Read text version
The parts in the CropSalt Dosatron nutrient-injection assembly, what each one does and where to buy it. The assembly runs two D14MZ2 injectors — one for Part A and one for Part B.
| Component | Function | Item number |
|---|---|---|
| 3/4 in. Dosatron D14MZ2 injector — 2 needed (A and B) | Injects concentrate into the water line at the set ratio. | D14MZ2 |
| 3/4 in. DAB starter kit | Includes the inlet parts for the nutrient delivery system. | HYKSTART-DAB |
| 3/4 in. water hammer arrestor kit | Protects the system from water hammer. | WHA34-SS-KIT |
| 3/4 in. mixing chamber kit | Enhances blending as the solution passes through. | HYKMC34 |
| 3/4 in. monitor kit | Measures and displays the EC and pH of the blended outgoing solution. | HYKMON |
CropSalt doser setting / 1:128 (0.8%)
Use two D14MZ2 injectors — one for A, one for B — both set to 1:128 (0.8%). A and B always run at the same rate, so when you change EC, adjust both injectors equally. During the Cake finish, run Cake through one injector and turn the other off.